Navigating The Offline Menu - CAB a2+ Configuration Instructions

A2+/A4+/A6+/A8+
Offline menu
3.2

Navigating the offline menu

You can control all settings and functions in the offline menu with the navigator pad.
Fig. 5: Navigator pad
You can also make all settings in the offline menu via the Ethernet interface (see "4.2" on Page 28) or
via direct control commands (see "Programming Manual" ).
Edition 5/06
⇒ Press the menu button to switch from Ready mode to the offline menu.
⇒ Press the
or button to select menu items on a menu level or to select
values on the parameter level.
⇒ Press the
button on the top menu level several times, if necessary, to
switch from the offline menu to Ready mode.
⇒ Press the
or button to reach a higher or lower menu level or to set
values on the parameter level.
⇒ Press the ↵ button briefly to enable value selection on the parameter level,
accept a selected value or start a function.
⇒ Press and hold (> 2 sec.) the ↵ button to exit the parameter level without
accepting the parameter setting.
Configuration Instructions 19