Connecting Label Printer Via Usb Interface - CAB a2+ Configuration Instructions

A2+/A4+/A6+/A8+
Connecting label printer to computer
2.3

Connecting label printer via USB interface

The high-speed USB interface allows the label printer to be operated via a USB interface of a computer
running the operating system Windows 98, Windows ME, Windows 2000 or Windows XP.
Windows 95 and Windows NT 4.0 do not support USB interfaces.
A printer driver must be installed if a USB interface will be used for connection. The printer driver for your
unit is found on the "Printer Accessories CD A+ Series" CD-ROM which is included in the scope of deliv-
ery or on the internet (see Page 2).
1. Switch label printer off.
2. Connect computer and label printer with an A-B cable.
3. Switch computer on.
4. Place the "Printer Accessories CD A+ Series" CD-ROM in the CD-ROM drive.
5. Exit all programs currently running.
6. Switch printer on.
The Windows Installation Wizard is started automatically.
7. Follow the on-screen instructions. The source of the installation file is
"D:\WINDRV\9X2000XP", where D is the letter of the CD-ROM drive used.
8. If the "Has Not Passed Windows Logo Testing" error message appears during installation, continue
with the installation anyway.
After successful installation, an icon for the label printer appears in the Windows "Printer" system
folder.
9. Click icon in "Printer" system folder and make printer settings if necessary.
Edition 5/06 Configuration Instructions 17