Device List - CAB a2+ Configuration Instructions

A2+/A4+/A6+/A8+
Test functions
5.5

Device list

The Device list function prints out the most important information on hardware components of the
printer and connected devices. The printout occurs using the heat level and print speed specified in the
Setup > Print param. menu.
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
1. Insert printable medium (labels, endless paper) which extends across the entire printing width.
2. If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum
width.
3. Press the menu button.
4. Select Test > Device list menu.
5. Start printout with the ↵ button.
You can cancel the printout with the cancel button.
Fig. 15: Device list
42 Configuration Instructions Edition 5/06