Move Commands; Search Commands; Miscellaneous Commands - Datalogic PowerScan 7000 2D Product Reference Manual

Data Formatting

Move Commands

F5 Move the cursor ahead "nn" characters from current cursor position.
Syntax = F5nn (nn stands for the numeric value (00-99) for the number
of characters the cursor should be moved ahead.)
F6 Move the cursor back "nn" characters from current cursor position.
Syntax = F6nn (nn stands for the numeric value (00-99) for the number
of characters the cursor should be moved back.)
F7 Move the cursor to the beginning of the data string. Syntax = F7.
EA Move the cursor to the end of the data string. Syntax = EA

Search Commands

F8 Search ahead for "xx" character from current cursor position, leaving cur-
sor pointing to "xx" character. Syntax = F8xx (xx stands for the hex
value for an ASCII code, see
on page A-4.)
F9 Search back for "xx" character from current cursor position, leaving cursor
pointing to "xx" character. Syntax = F9xx (xx stands for the hex value
for an ASCII code, see
page A-4.)
E6 Search ahead for the first non "xx" character from the current cursor posi-
tion, leaving cursor pointing to non "xx" character. Syntax = E6xx (xx
stands for the hex value for an ASCII code, see
(Code Page 1252) on page
E7 Search back for the first non "xx" character from the current cursor posi-
tion, leaving cursor pointing to non "xx" character. Syntax = E7xx (xx
stands for the hex value for an ASCII code, see
(Code Page 1252) on page

Miscellaneous Commands

FB Suppress all occurrences of up to 15 different characters, starting at the
current cursor position, as the cursor is advanced by other commands.
When the FC command is encountered, the suppress function is termi-
nated. The cursor is not moved by the FB command. Syntax = FBn-
nxxyy . .zz where nn is a count of the number of suppressed characters
in the list and xxyy .. zz is the list of characters to be suppressed. (xx
stands for the hex value for an ASCII code, see
(Code Page 1252) on page
FC Disables suppress filter and clear all suppressed characters. Syntax =
FC.
E4 Replaces up to 15 characters in the data string with user specified char-
acters. Replacement continues until the E5 command is encountered.
Syntax = E4nnxx
characters to be replaced plus replacement characters; xx
acters to be replaced and xx
through zz and zz
1
E5 Terminates character replacement. Syntax = E5.
FE Compare character in current cursor position to the character "xx." If
characters are equal, increment cursor. If characters are not equal, no
format match. Syntax = FExx (xx stands for the hex value for an ASCII
code, see ASCII Conversion Chart (Code Page 1252) on page
EC Check to make sure there is an ASCII number at the current cursor posi-
tion. If character is not numeric, format is aborted. Syntax = EC.
5-4
ASCII Conversion Chart (Code Page 1252)
ASCII Conversion Chart (Code Page 1252) on
A-4.
A-4.)
A-4.)
xx yy yy ...zz zz
1 2 1 2 1
defines replacement characters, continuing
2
.
2
ASCII Conversion Chart
ASCII Conversion Chart
ASCII Conversion Chart
where nn is the total count of both
2
PowerScan
defines char-
1
A-4.)
®
7000 2D