Codabar Concatenation - Datalogic PowerScan 7000 2D Product Reference Manual

Symbologies
When Check Character is set to Validate, but Don't Transmit, the unit
will only read Codabar bar codes printed with a check character, but will
not transmit the check character with the scanned data.
* No Check Character
Validate Modulo 16, but
Don't Transmit
Validate Modulo 16
and Transmit

Codabar Concatenation

Codabar supports symbol concatenation. When you enable concatena-
tion, the imager looks for a Codabar symbol having a "D" start character,
adjacent to a symbol having a "D" stop character. In this case the two
messages are concatenated into one with the "D" characters omitted.
Default = On.
Character
Start Stop Start Stop
Codabar
A12D D34A
Select Require to prevent the imager from decoding a single "D" Coda-
bar symbol without its companion. This selection has no effect on Cod-
abar symbols without Stop/Start D characters.
On
* Off
Require
®
6-4 PowerScan 7000 2D