Decode Search Mode - Datalogic PowerScan 7000 2D Product Reference Manual

Output
Scan Centering On, then scan one of the following bar codes to change
the top, bottom, left, or right of the centering window. Then scan the
percent you want to shift the centering window using digits on the
Pro-
. Scan Save. Default Centering = 40% for
gramming Chart on page B-5
Top and Left, 60% for Bottom and Right.
Centering On
* Centering Off
Top of Centering Window
Bottom of Centering Window
Left of Centering Window
Right of Centering Window

Decode Search Mode

There are three selectable decode (scanning) modes:
Full Omnidirectional - Searches for bar code features beginning at the
center of an image, and searches to the image's limits. This mode reads
all symbologies (including OCR), in any orientation. The Full Omnidi-
rectional search is very thorough which may slow performance time.
This search mode is the default setting.
NOTE
Full Omnidirectional
®
3-16 PowerScan 7000 2D