Ocr Fonts; Ocr - Datalogic PowerScan 7000 2D Product Reference Manual

OCR Programming
You can either select an OCR default, or create your own custom tem-
plate for the type of OCR format you intend to read. See
for programming codes that will enable your imager to read OCR-A,
2
OCR-B, U.S. Currency, MICR E 13 B, or SEMI fonts. See
Templates on page 8-5
character string that defines the length and content of OCR strings that
will be read with your imager.
NOTE

OCR Fonts

Default All OCR Settings
the imager will be able to scan linear, stacked, matrix, and composite bar
codes, but not OCR fonts. In addition, any OCR templates you have
created are erased. The eight digit default templates are reinstated for
any future use of the

OCR

NOTE
Only one OCR symbology can be read at a time.
8-2
if you want to create a custom "template," or
Setting the template and check character
options are essential for OCR reading
turns off all OCR capability in the imager, so
codes listed below.
OCR On
< Default All OCR Settings >
OCR symbols can misread when scanned side-
ways or upside down.
Orientation on page 3-24
will not usually be presented upright to the
scanner.
OCR on page 8-
Use
Working
, if your OCR symbols
PowerScan
OCR
®
7000 2D