Ean/Jan-13 - Datalogic PowerScan 7000 2D Product Reference Manual

Symbologies

EAN/JAN-13

EAN/JAN-13 Enable
* On
EAN/JAN-13 Check Digit Transmit
This selection allows you to specify whether the check digit should be
transmitted at the end of the scanned data or not. Default = On.
* On
EAN/JAN-13 Addenda
This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-13
data.
Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
5 Digit Addenda On
6-24
<Default All EAN/JAN Settings>
Off
Off
* 2 Digit Addenda Off
* 5 Digit Addenda Off
®
PowerScan 7000 2D