Micr E13 B Font; Semi Font - Datalogic PowerScan 7000 2D Product Reference Manual

OCR Programming

MICR E13 B Font

MICR E13 B On
The default setting allows you to scan any eight digit combination. If
you have created an OCR template, character combinations that fit the
template can be scanned (see
NOTE

SEMI Font

allows you to scan the SEMI font used in the semiconduc-
SEMI Font On
tor industry.
turns off all OCR capability in the imager, so the imager will
All OCR Off
be able to scan linear, stacked, matrix, and composite bar codes, but not
OCR fonts. However, any OCR templates you have created will be
retained in memory.
8-4
allows you to scan MICR characters on a bank check.
Creating an OCR Template on page 8-5
MICR E 13 B On
TOAD characters (Transit, On Us, Amount and
Dash) are output in the following manner:
The Transit character is output as T
The On Us character is output as O
The Amount character is output as A
The Dash character is output as D
SEMI Font On
* All OCR Off
®
PowerScan 7000 2D
).