Interleaved 2 Of 5; Check Digit - Datalogic PowerScan 7000 2D Product Reference Manual

Linear Symbologies
Code 39 Code Page
Code pages define the mapping of character codes to characters. If the
data received does not display with the proper characters, it may be
because the bar code being scanned was created using a code page that is
different from the one the host program is expecting. If this is the case,
scan the bar code below, select the code page with which the bar codes
were created (see )
Code Page Mapping of Printed Bar Codes on page A-7
and scan the value and the bar code from the
Save
Programming Chart on
of this manual. The data characters should then appear prop-
page B-5
erly.
Code 39 Code Page

Interleaved 2 of 5

< Default All Interleaved 2 of 5 Settings >
Interleaved 2 of 5 Enable
* On
Off

Check Digit

indicates that the imager reads and transmits bar code data
No Check Digit
with or without a check digit.
When Check Digit is set to , the unit only
Validate, but Don't Transmit
reads Interleaved 2 of 5 bar codes printed with a check digit, but will not
transmit the check digit with the scanned data.
Product Reference Guide 6-9