Ocr Modulo 10 Check Character; Ocr Modulo 36 Check Character - Datalogic PowerScan 7000 2D Product Reference Manual

OCR Check Character
dddddddc
To create this template, you would enable the OCR-A font. Scan the
symbol. Then scan the
Modulo 10 Check Character Enter OCR Template
symbol, and scan the from the seven times,
d OCR Programming Chart
and scan the once. Scan ( ). This tem-
c Save OCR Template page 8-17
plate will let you read any combination of six digits with a correct check
character after. (If the check character is invalid, the imager will issue an
error beep.) For example, the following string could be scanned:
01234569
and the output would be: 0123456

OCR Modulo 10 Check Character

Scan this symbol to program the OCR template for a simple modulo 10
checksum of the digits 0 through 9.
OCR Modulo 10 Check Character

OCR Modulo 36 Check Character

Scan this symbol to program the OCR template for a simple modulo 36
checksum of the digits 0 through 9 and the letters A through Z.
OCR Modulo 36 Check Character
Product Reference Guide 8-11