Korenix Private Mib - Korenix JetNet 6710G Series User Manual

5.2

Korenix Private MIB

Korenix provides many standard MIBs for users to configure or monitor the
switch's configuration by SNMP. But, since some commands can't be found in
standard MIB, Korenix provides Private MIB to meet up the need. Compile the
private MIB file by your SNMP tool. You can then use it. Private
Private MIB tree is the same as the web tree. This is easier to understand and
use. If you are not familiar with standard MIB, you can directly use private MIB to
manage /monitor the switch, no need to learn or find where the OIDs of the
commands are MIB can be found in product CD or downloaded from Korenix
Web site.
The path of the JetNet 6710G is 1.3.6.1.4.1.24062.2.3.3 as below figure.
The JetNet 6710G's private MIB supports various of MIB entries, which are
system basic setting, port configuration, PoE configuration, network redundancy,
VLAN, traffic priority,multicasting, snmp, security, system warning, monitoring
and configuration saving. User can monitoring and configures JetNet 6710G by
SNMP MIB browser tools and through those MIB entries to achieve remote
management.
The Private MIB includes thirteen major entries a below for system configuration
and monitoring
.
System information: read only
140