Cli Commands Of The Monitor And Diag - Korenix JetNet 6710G Series User Manual

4.13.7 CLI Commands of the Monitor and Diag

Command Lines of the Monitor and Diag configuration
Feature
MAC Address Table
Ageing Time
Add Static Unicast MAC
address
Add Multicast MAC
address
Show MAC Address
Table – All types
Command Line
Switch(config)# mac-address-table aging-time 350
mac-address-table aging-time set ok!
Note: 350 is the new ageing timeout value.
Switch(config)# mac-address-table static 0012.7701.0101
vlan 1 interface fastethernet7
mac-address-table ucast static set ok!
Note: rule: mac-address-table static MAC_address VLAN
VID interface interface_name
Switch(config)# mac-address-table multicast 0100.5e01.0101
vlan 1 interface fa6-7
Adds an entry in the multicast table ok!
Note: rule: mac-address-table multicast MAC_address
VLAN VID interface_list interface_name/range
Switch# show mac-address-table
***** UNICAST MAC ADDRESS *****
Destination Address Address Type
------------------- --------------- ------- ------------------------
000f.b079.ca3b Dynamic
Vlan Destination Port
1 fa4
129