Revision History - Korenix JetNet 6710G Series User Manual

5.3

Revision History

Edition Date
V01
V02 11-Nov,2010
V03 25-Nov,2010
V04 15-DEC-2010
V05 Jun-2011
Modifications
New Edittion
Modify M12 A 5-Pin connector pin assignment for
console port. – Picture change
Change Port Link LED description.- Specification
Change Port –PoE output polarity information. –
Specification
Change VLAN group from 64 to 256.
Modify drawing of Web UI
Change RS description
Updte M12-RJ-45 Gigabit Cable assembly drawing
Update Product Specification:
Hi-Pot : port to case, power to case
Note: To enable the IEEE 802.3at High Power PoE
function, the power input voltage should be over than
DC 55V. Applies DC 48V to PoE Switch and perform
30W high power output will cause the PoE auto
disable, due the output current protect mechanism
activated.
Refer to firmware version v1.0a with following
changes:
1. New type of daylight saving configuration.
142