Figure 3-15. Removing and Installing the Cooling Shroud
1
1
cooling shroud
3
release tab
Installing the Cooling Shroud
1 Align the holes on the cooling shroud with the alignment guides on the
system fan.
2 Hold the touch points on the cooling shroud and carefully lower the
cooling shroud into the system. Ensure that no cables are under the edges
of the cooling shroud.
3 Replace the expansion-card stabilizer. See "Installing the Expansion-Card
Stabilizer" on page 78.
4 Close the system. See "Closing the System" on page 60.
80
Installing System Components
2
4
2
expansion-card stabilizer
4
cooling shroud touch points (2)
3