Jumpers And Connectors; System Board Jumper - Dell PowerEdge T110 II Owner's Manual

Jumpers and Connectors

System Board Jumper

For information on resetting the password jumper to disable a password, see
"Disabling a Forgotten Password" on page 134.
Table 6-1. System Board Jumper Settings
Jumper Setting
PWRD_EN
NVRAM_CLR
Description
(default) The password feature is enabled
The password feature is disabled
(default) The configuration settings are retained at system
boot (pins 3–5)
The configuration settings are cleared at the next
system boot (pins 1–3)
Jumpers and Connectors
6
(pins 2–4)
(pins 4–6)
131