Dell PowerEdge T110 II Owner's Manual page 71

Figure 3-9. Removing or Installing a 3.5-Inch Hard Drive
1 hard drive
3 tabs (2)
NOTE:
bracket (see Figure 3-11) and insert the empty bracket back into the drive bay.
5 Detach the hard-drive bracket from the hard drive by pushing out at the
edges of the bracket and removing the hard drive. See Figure 3-11.
6 Close the system. See "Closing the System" on page 60.
7 Place the system upright on a flat, stable surface.
8 Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
1
If you are not replacing the hard drive, remove the drive from the drive
2
2 power/data cable
4 hard drive bracket
Installing System Components
3
4
71