Dell PowerEdge T110 II Owner's Manual page 98

Figure 3-21. Replacing the System Battery
1 positive side of battery connector
3 negative side of battery connector
5 To install the new system battery, hold the battery with the "+" facing up,
and aligned to the metal tab on the socket. Press the battery straight down
into the socket until it snaps into place.
6 Close the system. See "Closing the System" on page 60.
7 Enter the System Setup program to confirm that the battery is operating
properly. See "Using the System Setup Program and UEFI Boot Manager"
on page 35.
8 Enter the correct time and date in the System Setup program's Time and
Date fields.
9 Exit the System Setup program.
98
Installing System Components
1
2
2
3
system battery