Dell PowerEdge T110 II Owner's Manual page 105

Figure 3-25. Removing the Link Bracket Lock
1 link bracket lock
6 Remove the mounting screw holding the control panel assembly to the
front chassis. See Figure 3-26.
7 Lift the control panel assembly out of the system.
8 Disconnect the control panel cable from the control panel assembly:
CAUTION:
Do not pull on the cable to unseat the connector. Doing so can damage
the cable.
Press the metal tabs on the ends of the cable connector.
a
Gently work the connector out of the socket.
b
Installing System Components
1
105