Exit Screen; Entering The Uefi Boot Manager; Using The Uefi Boot Manager Navigation Keys - Dell PowerEdge T110 II Owner's Manual

Exit Screen

Press <Esc> to exit the System Setup program; the Exit screen displays:
•
Save Changes and Exit
•
Discard Changes and Exit
•
Return to Setup

Entering the UEFI Boot Manager

NOTE:
Operating systems must be 64-bit UEFI-compatible (for example, Microsoft
Windows Server 2008 x64 version) to be installed from the UEFI boot mode. DOS and
32-bit operating systems can only be installed from the BIOS boot mode.
NOTE:
The Boot Mode must be set to UEFI in the System Setup program to access
the UEFI Boot Manager.
The UEFI Boot Manager enables you to:
• Add, delete, and arrange boot options
• Access the System Setup program and BIOS-level boot options without
rebooting
To enter the UEFI Boot Manager:
1 Turn on or restart your system.
2 Press <F11> after you see the following message:
<F11> = UEFI Boot Manager
NOTE:
If your operating system begins to load before you press <F11>, allow the
system to finish booting, and then restart your system and try again.

Using the UEFI Boot Manager Navigation Keys

Keys
Up arrow
Down arrow
Spacebar, <Enter>, <+>,
–
< >
The system will not respond until the USB keyboard is active.
Action
Moves to and highlights the previous field.
Moves to and highlights the next field.
Cycles through the settings in a field.
Using the System Setup Program and UEFI Boot Manager
47