Dell PowerEdge T110 II Owner's Manual page 27

Message
Sector not found.
Seek error.
Seek operation
failed.
Shutdown
failure.
The amount of
system memory has
changed.
Causes
Faulty hard drive, USB
device or medium.
General system error.
Memory has been added or
removed or a memory
module may be faulty.
Corrective Actions
Replace the USB medium or
device. Ensure that the USB
cables are properly connected.
See "Troubleshooting a USB
Device" on page 112 or
"Troubleshooting a Hard
Drive" on page 123 for the
appropriate drive(s) installed
in your system.
See "Getting Help" on
page 135.
If memory has been added or
removed, this message is
informative and can be
ignored. If memory has not
been added or removed, check
the SEL to determine if single-
bit or multi-bit errors were
detected and replace the faulty
memory module. See
"Troubleshooting System
Memory" on page 119.
About Your System
27