System Security Screen - Dell PowerEdge T110 II Owner's Manual

System Security Screen

Option
TPM Security
(Off default)
TPM Activation
TPM Clear
Intel (R) TXT
(Disabled default)
System Password
(Not Enabled default)
Description
Sets the reporting of the Trusted Platform Module
(TPM) in the system.
If Off, the presence of the TPM is not reported to the
operating system.
If On with Pre-boot Measurements, the system reports
the TPM to the operating system and stores the pre-boot
measurements to the TPM during POST.
If On without Pre-boot Measurements, the system
reports the TPM to the operating system and bypasses
pre-boot measurements.
When set to Activate, the TPM is enabled to default
settings. When set to Deactivate, the TPM is disabled.
The No Change state initiates no action. The operational
state of the TPM remains unchanged (all user settings for
the TPM are preserved).
NOTE:
This field is read-only when TPM Security is set to
Off.
CAUTION:
keys in the TPM. This option prevents booting to the
operating system and results in data loss if the
encryption keys cannot be restored. Back up the TPM
keys prior to enabling this option.
When set to Yes, all TPM contents are cleared.
NOTE:
This field is read-only when TPM Security is set
to Off.
Enables/disables Trusted Execution Technology. To
enable TXT, enable & activate VT & TPM with preboot
measurement.
Displays the current status of the password security
feature and allows a new system password assignment and
verification.
NOTE:
See "Using the System Password" on page 49 for
more information.
Using the System Setup Program and UEFI Boot Manager
Clearing the TPM will lose all encryption
45