During Transportation And Storage; Machine Symbols - Primus 6kg Installation And Maintenance Manual

2.1. DURING TRANSPORTATION AND STORAGE

DURING TRANSPORTATION AND STORAGE NEVER PUSH, PULL OR EXERT PRESSURE ON COMPONENTS
PROTRUDING FROM THE CONTOUR LINE OF THE MACHINE (CONTROL ELEMENTS, DOOR LOCKS
ETC.). MAKE SURE THAT THESE PARTS ARE SECURED TO AVOID ANY DAMAGE DURING MANIPULATION
AND INSTALLATION.
If transportation is provided by the customer it is necessary to follow the manufacturer´s instructions concerning
transportation, handling and storage. In this case the manufacturer is not responsible for any damage of
machine during transportation.
The ambient temperature for transportation and storage must be between -5°C and +55°C. Relative
humidity must be between 30 % and 90% without condensation. When stored in a free area the machine must
be protected against mechanical damage and weather condition effects.

2.2. MACHINE SYMBOLS

See User's manual.
516574_C_PUB_DATE_3_NOV_2009.DOC INSTALLATION AND MAINTENANCE MANUAL 3