Installation; Handling, Transport And Storage - Primus MB 90 Installation And Maintenance Manual

www.groupdynamics-laundry.com
sales@groupdynamics.lv

4. INSTALLATION

4.1. HANDLING, TRANSPORT AND STORAGE

TRANSPORT AND STORAGE
WARNING !
!
FORKS OF HIGH LIFTING TRUCK MUST HAVE SUFFICIENT LENGTH (SEE FIG. 4.1).
For handling the machine in packing, use the fork lift truck or four (alternatively two) manual pallet trucks.
The machine pallet is designed for handling in both (mutually vertical) directions, see fig. 4.1.B. and 4.1.C.
– The ambient temperature of transportation and storage must be between -25°C and +55°C. The machine
must not be installed within the reach of spraying water. Avoid severe climatic conditions and excessive
humidity. When steamed up due to the temperature changes, water must not run over the walls and
covers of the machine nor to cover the floor under and around the machine.
– If possible, leave the machine in the transporting package or at least let it set on the transporting wooden
skid until the time of final installation on the foundation according the chapter 4.3. of this manual.
Dimension „X", see tab. 3.1.
Machine width or depth - according
to direction of handling.
2x MANUAL PALLET TRUCK
2x MANUAL PALLET TRUCK
Fig.4.1.B. Handling in direction of loading
and unloading
HANDLING DURING INSTALLATION
All activities can be done only by a worker, who knows all information about the machine. Machine is delivered
to the customer in a wooden packing or wooden crate and protected with polyethylene film. The machine is
attached to the skid by means of four bolts.
To remove the machine to its final position follow these precautions:
513289 PUBLICATION DATE 07/04
Fig. 4.1.A Minimum length „X" of lift truck forks
INSTALLATION AND MAINTENANCE MANUAL
Fig. 4.1.C. Handling in direction of the pulley
side and inlet valves side
7