Important Safety Instructions - Primus 6kg Installation And Maintenance Manual

2. IMPORTANT SAFETY INSTRUCTIONS

WARNING - SAVE THESE INSTRUCTIONS FOR LATER USE.
Failure to comply with the instructions may lead to incorrect use of the appliance, and may
result in risk of fire, bodily injuries or death and/or damage to the laundry and/or the appliance.
WARNING - read the IMPORTANT SAFETY INSTRUCTIONS in this manual carefully before
operating the appliance. improper use of the appliance may cause risk of fire, electrical
shock or serious body injuries or death as well as serious damage to the appliance.
– This English version is the original version. Without this version, the instructions are incomplete.
– Before installation, operation and maintenance of the machine read carefully the complete instructions, i.e.
this „Installation, maintenance and user's manual", „Programming manual" and „Spare parts manual".
The Programming manual and Spare parts manual are not delivered with a machine by default. You shall
ask the supplier / manufacturer to obtain Programming manual and Spare parts manual.
– Follow the instruction written in manuals and keep the manuals in a proper place by the machine for later use.
– Safety instructions included in manuals for personnel operating the washing machine must be printed and posted
on a visible place near the machine in the laundry room.
– If any problems or failures occur which you do not understand, immediately contact your dealer, serviceman or
manufacturer.
– Follow all basic and valid safety instructions and laws. Do not bypass the instructions stated in the instruction
manual, and warnings on the labels. The labels must stay on the machine and they must be legible.
– The machine must be connected to the power, ground, water, ventilation and steam supply according to
the installation manual, in compliance with the local standards done by qualified technicians with proper
authorization. The valid standards for connecting to the local power network (TT / TN / IT, ...) must be followed.
In the standard execution, the washer may not be suitable for connecting to an IT supply system.
– If you have a machine with frequency inverter do not change the parameters of the inverter. Doing so can
cause serious injury, fire, machine damage, etc.
– The washer extractor is intended to be permanently connected to fixed wiring.
– The machine must be connected to the voltage supply throuht the main switch which is a part of electric
installation in the place of the machine installation. This main switch must be easily accessible for the machine
operator.
– Any changes concerning the installation which are not described in this Installation Manual, must be
approved by the supplier or manufacturer. Otherwise, the supplier and manufacturer are not responsible
for potential injuries to operators or for any damages. Interventions into the machine execution or functions
are not allowed, and the manufacturer refuses any responsibility in such cases.
– Define the dangerous areas in the laundry room and obstruct an admission to them during machine's operating.
– Operation of the machine with malfunctions, missing parts or open covers is not allowed.
– Do not tamper with the machine's control.
– It is possible that there are residues of products used during the production proces in the new washer.
These residues could cause stains on your laundry. Therefore, you must first run at least 1 hot wash
with old rags before using for your normal laundry.
– Do not store flammable materials around the machine.
– Keep the top of the machine clean, with out the presence of flammable materials. Do not wash or spray
the machine with running water.
– Regularly once a three months check the proper function of ground and emergency button.
– Disconnect the power supply to the machine before doing any interventions to the machine.
– When the „O / I" switch is in the position off „O", the electrical parts are still under tension. Pull out the plug
from power supply network. The machine is without tension only when the plug is out of the socket!
– The emergency stop device is omitted on machines design for coin, token, external payment system or
similar operation for use in self-service situation. The owner-installer-user must provide a remote-located
emergency stop device that is connected to each machine.
– Do not repair or adjust belt drive when the machine is in operation, plug out the plug for repair or maintenance.
Do not repair or replace any part of the washer, or attempt any servicing unless specifically recommended
in the maintenance instructions. All other servicing should be referred to a qualified service person.
– The instructions and warnings described in this manual do not include all conditions and situations which
may occur during the installation, maintain or operate of your machine. They must be generally understood.
Caution and care are factors which are not included in the design of this machine and all persons who
install, operate or maintain the machine must be qualified and familiar with the operating instructions.
WARNING!
!
LOOKING AT THE MACHINE FROM THE FRONT VIEW THE DRUM ROTATION DURING EXTRACTION
MUST BE CLOCKWISE.
Installation and service can be done only by a service organization with proper authorization from the manufacturer.
2 INSTALLATION AND MAINTENANCE MANUAL 516574_C_PUB_DATE_3_NOV_2009.DOC