Power Management Setup Page - ECS P49G Series User Manual

Motherboard User's Guide
Parallel Port IRQ
Use this item to assign IRQ to the parallel port.
USB Functions
Use this item to enable or disable the USB function.
Legacy USB Support
Use this item to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy
USB support is disabled.
Press <Esc> to return to the main menu setting page.

Power Management Setup Page

This page sets some parameters for system power management operation.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
ACPI Suspend Type
PWRON After PWR-Fail
Resume By RING
Resume By PCI/PCI-E/Lan PME
Resume By PS2 KB (S3)
Resume By PS2 MS (S3)
Resume on RTC Alarm
: Move Enter: Select +/-/: Value
F1: General Help
ACPI Suspend Type
Use this item to define how your system suspends. In the default, S3 (STR), the
suspend mode is a suspend to RAM, i.e., the system shuts down with the excep-
tion of a refresh current to the system memory.
PWRON After PWR-Fail
This item enables your computer to automatically restart or return to its operating
status.
Resume By RING
An input signal on the serial Ring Indicator (RI) line (in other words, an incoming
call on the modem) awakens the system from a soft off state.
Power Management Setup
S3
Power Off
Disabled
Select the ACPI
Disabled
state used for
Disabled
System Suspend.
Disabled
Disabled
F10: Save Esc: Exit
F9: Load Default Settings
28
Help Item