Power Management Setup Page - ECS K7AMA User Manual

Power Management Setup Page

This page sets some of the parameters for system power
management operation.
AMIBIOS SETUP – POWER MANAGEMENT SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Power Management
Ring On Power On
Resume On PME#
RTC Alarm Power On
RTC Alarm Date
RTC Alarm Hour
RTC Alarm Minute
RTC Alarm Second
KeyBoard PowerOn
HotKey Select
Power
Use this item to select a power management
Management
scheme. Both APM and ACPI are supported.
Ring On Power On
The system can be turned off with a software
command. If you enable this item, the system can
automatically resume if there is an incoming call
on the Fax/Modem. You must use an ATX power
supply in order to use this feature.
Resume On PME#
The system can be turned off with a software
command. If you enable this item, the system can
automatically resume if there is traffic on the
onboard network adapter or PCI LAN/Modem
card. You must use an ATX power supply in order
to use this feature.
RTC Alarm Power
The system can be turned off with a software
On / Date / Hour / command. If you enable this item, the system can
automatically resume at a fixed time based on the
Minute / Second
system's RTC (realtime clock). Use the items
below this one to set the date and time of the
wake -up alarm. You must use an ATX power
supply in order to use this feature.
KeyBoard Power
If you enable this item, you can turn the system on
On
and off by pressing hot keys on the keyboard. You
must enable the Keyboard Power On jumper and
use an ATX power supply in order to use this
feature.
Disabled
Disabled
Disabled
Disabled
Every Day
12
30
30
Disabled
N/A
ESC : Quit
F1 : Help
F5 : Old Values (Shift)F2
F6 : Load Optimal values
F7 : Load Best performance values
25
↑↓←→ : Select Item
PU/PD/+/ - : Modify
: Color