Advanced Setup Page - ECS P49G Series User Manual

Motherboard User's Guide

Advanced Setup Page

This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Thermal Management
TM Status
Limit CPUID MaxVal
Enhanced Halt (C1E)
Intel XD Bit
Intel EIST
Quick Power on Self Test
Boot Up Numlock Status
APIC Mode
1st Boot Device
2nd Boot Device
3rd Boot Device
Hard Disk Drives
CD/DVD Drivers
Boot Other Device
: Move Enter: Select +/-/: Value
F1: General Help
Thermal Management
This item displays CPU's temperature and enables you to set a safe temperature
to Prescott CPU.
TM Status
This item displays CPU Monitor status.
Limit CPUID MaxVal (Disabled)
Use this item to enable or disable the Max CPU ID value limit. When supports
Prescott and LGA775 CPUs, enables this to prevent the system from "rebooting"
when trying to install Windows NT 4.0.
Enhanced Halt (C1E)
This item enables or disables enhanced halt (C1E).
Intel XD Bit
This item allows users to enable or disable the Intel XD bit.
Intel EIST
This item allows users to enable or disable the EIST
technology).
Quick Power On Self Test
Enable this item to shorten the power on self testing (POST) and have your system
start up faster. You might like to enable this item after you confident that your
system hardware is operating smoothly.
Boot Up NumLock Status
This item determines if the NumLock key is active or inactive at system start-up
time.
Advanced Setup
Help Item
Enabled
TM1/TM2
Disabled
For the processor its
Enabled
CPUID belows 0F14h.
Disabled
TM2 only can be enable
Enabled
under below settings.
Enabled
1.Freq.>=3.6GHz FSB800
On
2.Freq.>=2.8GHz FSB533
Enabled
Hard Drive
CD/DVD
Removable Dev.
Press Enter
Press Enter
Yes
F10: Save Esc: Exit
F9: Load Default Settings
(Enhanced Intel SpeedStep
24