Advanced Chipset Setup Page - ECS P49G Series User Manual

Motherboard User's Guide
Press <Esc> to return to the main menu page.

Advanced Chipset Setup Page

This page sets up more advanced chipset information about your system. Handle
this page with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
DRAM Frequency
Configure DRAM Timing by SPD
Share Memory Size
DVMT Memory
Memory Remap Feature
HPET
: Move Enter: Select +/-/: Value
F1: General Help
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The default setting is auto
and we recommend users leave the setting unchanged. Modify it at will may cause
the system to be unstable.
Configure DRAM Timing by SPD (Enabled)
When this item is set to enable, the DDR timing is configured using SPD. SPD
(Serial Presence Detect) is located on the memory modules, BIOS reads informa-
tion coded in SPD during system boot up.
Share Memory Size (64MB)
This item lets you allocate a portion of the main memory for the onboard VGA
display application.
DVMT Memory (256MB)
When set to Fixed Mode, the graphics driver will reserve a fixed portion of the
system memory as graphics memory, according to system and graphics requirements.
Memory Remap Feature (Enabled)
This item allows you to remap the overlapped PCI memory above the total physical
memory if you have a 64 bit OS and 8 GB of RAM.
HPET (Enabled)
This item enables or disables HPET (High Precision Event Timer) support.
Press <Esc> to return to the main menu setting page.
Advanced Chipset Setup
Auto
Enabled
64MB
256MB
Enabled
Enabled
F10: Save Esc: Exit
F9: Load Default Settings
26
Help Item
Options
Auto
800 MHz
1066 MHz