ECS P49G Series User Manual page 26

IDE BusMaster
This item enables or disables the DMA under DOS mode. We recommend you to
leave this item at the default value.
IDE Devices
Your computer has one IDE channel which can be installed with one or two devices
(Master and Slave). In addition, this motherboard supports two SATA channels and each
channel allows one SATA device to be installed. Use these items to configure each
device on the IDE channel.
CMOS SETUP UTILITY – Copyright (C) 1985-2005, American Megatrends, Inc.
Primary IDE Master
Device
Vendor
LBA Mode
PIO Mode
Async DMA
Ultra DMA
Type
PIO Mode
DMA Mode
: Move
F1: General Help
Type (Auto)
Use this item to configure the type of the IDE device that you specify. If the feature
is enabled, it will enhance hard disk performance by reading or writing more data during
each transfer.
PIO Mode
Use this item to set the PIO mode to enhance hard disk performance by optimizing
the hard disk timing.
DMA Mode
DMA capability allows user to improve the transfer-speed and data-integrity for
compatible IDE devices.
Press <Esc> to return to the Standard CMOS Setup page.
IDE BusMaster (Enabled)
This item enables or disables the DMA under DOS mode. We recommend you to leave
this item at the default value.
Press <Esc> to return to the main menu setting page.
Chapter 3: BIOS Setup Utility
Primary IDE Master
: ATAPI CDROM
Select the type
: DVD-ROM DDU1632
of device connected
: Supported
to the system.
: 4
: MultiWord DMA-2
: Ultra DMA-2
Auto
Auto
Auto
Enter : Select F10: Save ESC: Exit
+/-/: Value
F9: Load Default Settings
23
Help Item