Standard Cmos Setup Page - ECS P49G Series User Manual

Motherboard User's Guide
Some options on the main menu page lead to tables of items with installed values
that you can use cursor arrow keys to highlight one item, and press PgUp and PgDn
keys to cycle through alternative values of that item. The other options on the main
menu page lead to dialog boxes requiring your answer OK or Cancel by selecting the
[OK] or [Cancel] key.
If you have already changed the setup utility, press F10 to save those changes and
exit the utility. Press F1 to display a screen describing all key functions. Press F9
to load optimal settings.

Standard CMOS Setup Page

This page displays a table of items defining basic information of your system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Date
Time
Primary IDE Master
Primary IDE Slave
SATA1
SATA2
IDE BusMaster
: Move Enter: Select +/-/: Value
F1: General Help
Date & Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
Primary IDE Master/Primary IDE Slave
Use these items to configure devices connected to the Primary IDE channels. To
configure an IDE hard disk drive, choose Auto. If the Auto setting fails to find a hard
disk drive, set it to User, and then fill in the hard disk characteristics (Size, Cyls,
etc.) manually. If you have a CD-ROM drive, select the setting CDROM. If you
have an ATAPI device with removable media (e.g. a ZIP drive or an LS-120), select
Floptical.
SATA1/2
These items display the status of auto detection of sata devices when "Onboard
SATA-IDE" sets to "IDE".
Standard CMOS Setup
Wed 11/24/2009
Help Item
16 : 02 : 00
User [Enter], [TAB]
Not Detected
or [SHIFT-TAB] to
Not Detected
select a field.
Hard Disk
Not Detected
Use [+] or [-] to
configure system Date.
Enabled
F10: Save Esc: Exit
F9: Load Default Settings
22