Load Default Settings; Supervisor Password Page - ECS P49G Series User Manual

CPU Frequency
This item indicates the current CPU frequency. Users can not make any change to
this item. Please noted that the frequency will be varied with different CPU.
CPU Frequency Setting (333MHz)
This item is used to set the CPU Frequency.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
Press <Esc> to return to the main menu setting page.

Load Default Settings

This option opens a dialog box that lets you install stability-oriented defaults for
all appropriate items in the Setup Utility. Select <OK> and then press <Enter> to
install the defaults. Select <Cancel> and then press <Enter> to not install the
defaults.

Supervisor Password Page

This page helps you set up some parameters for the hardware monitoring
function of this motherboard.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Supervisor Password : Not Installed
Change Supervisor Password
: Move Enter: Select +/-/: Value
F1: General Help
Supervisor Password
This item indicates whether a supervisor password has been set. If the password
has been installed , Installed displays. If not, Not Installed dispalys.
Change Supervisor Password
You can select this option and press<Enter> to access the sub menu. You can use
the sub menu to change the supervisor password.
Press <Esc> to return to the main menu setting page.
Chapter 3: BIOS Setup Utility
Supervisor Password
Help Item
Press Enter
Installed or Change the
password.
F10: Save Esc: Exit
F9: Load Default Settings
35