Volume Adjustment - Sena SPH10S User Manual

5. VOLUME ADJUSTMENT

You can easily adjust the volume by rotating the Jog
Dial. You will hear a beep when the volume reaches
maximum or minimum level. The volume is set and
maintained independently at different levels for each
audio source even when you turn off and on the headset.
For example, once you set the volume for mobile phone
handsfree, it will not change even if you adjust the
volume when you hear Bluetooth MP3 music. So you
can always maintain the preferred optimum volume level
for each audio source.
6. PAIRING THE SPH10S WITH
BLUETOOTH DEVICES
Before using the SPH10S Bluetooth headset with any
of Bluetooth devices for the first time, you need to do
the pairing operation. It can be paired with Bluetooth
mobile phones, Bluetooth stereo devices such as MP3,
and with other Sena Bluetooth headsets. This pairing
operation is only required once for each Bluetooth
device. The headset will remain paired with the devices
and automatically connects to the paired devices again
when they are within range. You will hear a high tone
single beep and a voice prompt when the headset
connects to the paired device automatically: "Phone
connected" to a mobile phone, "Media connected" to
a Bluetooth stereo device.
6.1 Mobile Phone Pairing
1. Turn on the headset and press the Phone Button for 5
seconds until the LED flashes red and blue alternately
and you hear multiple beeps. You will hear a voice
prompt saying "Phone pairing".
2. Search for Bluetooth devices on your mobile phone.
Select the Sena SPH10S in the list of the devices
SPH10S
7