Stereo Music; By Stereo Audio Cable; By Bluetooth Wireless Stereo - Sena SPH10S User Manual

11. STEREO MUSIC

You can listen to stereo music in two ways: with the
enclosed stereo audio cable or by Bluetooth wireless
stereo.

11.1 By Stereo Audio Cable

Plug your stereo MP3 player directly to the SPH10S
by using the enclosed 3.5mm stereo audio jack
cable. To adjust the volume, rotate the Jog Dial on
the headset. You may adjust the volume on the MP3
player also.

11.2 By Bluetooth Wireless Stereo

The Bluetooth audio device must be paired with the
SPH10S by following the "Bluetooth Stereo Device
Pairing" procedures described in the 6.2 chapter.
MP3 Jack
The SPH10S supports the Audio/Video Remote
Control Profile (AVRCP), so if your Bluetooth audio
device also supports the AVRCP, you can use the
SPH10S to remotely control music playback. You not
only can adjust the volume but also use the functions
such as play, pause, next track and previous track.
1. To adjust the volume, rotate the Jog Dial.
2. To play or pause music, press and hold the Jog
Dial for 1 second until you hear a double beep.
SPH10S
15