Three-Way Conference Phone Call With Intercom Participant; Intercom Failure; Intercom Reconnection - Sena SPH10S User Manual

SPH10S
16. THREE-WAY CONFERENCE PHONE CALL
WITH INTERCOM PARTICIPANT
You can have a three-way conference phone call
by adding an intercom friend to the mobile phone
conversation. While having a mobile phone call, make
an intercom call to one of the intercom friends by
tapping the Jog Dial to form a three-way conference call
with the person on the mobile phone line. To disconnect
the intercom first and go back to your private mobile
phone call, terminate the intercom by tapping the Jog
Dial. To end the mobile phone call first and maintain
the intercom conversation, press the Jog Dial for 2
seconds, or tap the phone button, or wait for the person
on the mobile phone line to end the call.
Start Tap Jog Dial while having a mobile phone call
End intercom
Tap Jog Dial
first
Press Jog Dial for 2"
or
End phone
Tap Phone Button
call first
or
Wait for the called person to end the call
Start & End Three-way Conference Phone Call
22

17. INTERCOM FAILURE

When you try to start an intercom conversation with an
intercom friend who is already having a conference
intercom with other riders or a mobile phone call,
you will hear a low tone double beep signifying an
intercom busy signal. In this case, you have to try
again later.

18. INTERCOM RECONNECTION

If your intercom friend goes out of range while having
an intercom conversation, you may hear static noise
and eventually the intercom will be disconnected. In
this case, the SPH10S automatically tries to reconnect
the intercom every 8 seconds and you will hear high
tone double beeps until the intercom is reestablished.
If you don't want to make a reconnection, tap the Jog
Dial to stop the attempt.