Exit Voice Configuration Menu; Function Priority - Sena SPH10S User Manual

SPH10S
Taping the Jog Dial is not available for this setting.

9.6 Exit Voice Configuration Menu

Voice Prompt
Factory Default
Enable
To exit voice configuration menu and get back to stand-
by mode, rotate the Jog Dial until you hear a voice
prompt, "Exit configuration", and tap the Phone
Button to confirm. Taping the Jog Dial is not available
for this setting.
Rotate Jog Dial Tap Phone Button
VOX Phone
VOX Intercom
Voice Prompt
PLC Setting
Delete All Pairings
Exit Configuration
Voice Configuration Menu & Button Operations
14
"Exit configuration"
N/A
Tap the Phone Button
Tap Jog Dial
Enable Disable
Enable Disable
Enable Disable
Enable Disable
Execute N/A
Execute N/A

10. FUNCTION PRIORITY

The SPH10S operates in the following order of priority:
(highest) Mobile phone,
Intercom,
Stereo music by audio cable
(lowest) Bluetooth stereo music
A lower priority function is always interrupted by a
higher priority function. For example, stereo music is
interrupted by intercom call, and intercom conversation
is interrupted by incoming mobile phone call.