Enabling/Disabling Voice Activated Phone Answering; Enabling/Disabling Voice Prompts - Sena SMH5 User Manual

2. Tap the Phone Button, and you will hear a voice prompt saying
"Speed dial one" and "Phone connected".
3. Rotate the Jog Dial to select one of three speed dial numbers and
you hear a voice prompt saying "Speed dial (#)".
4. Call a phone number you want to assign and you will hear a voice
prompt saying "Save speed dial (#)". The phone number is
automatically assigned to the selected speed dial number. Then
the phone call will hang up before being connected.
5. To exit the menu, rotate the Jog Dial clockwise or counter
clockwise until you hear a voice prompt saying "Cancel", and tap
saying "Cancel". If any button is not pressed within 1 minute, the
mode.
Note:
1. After assigning a phone number to one of three speed dials, you can
continually assign another phone number to the rest of two speed dials.
2. You can assign phone numbers to speed dials in your PC. Please visit the
Sena Bluetooth web site at www.sena.com for more information.

10.2 Enabling/Disabling Voice Activated Phone Answering

Voice Prompt
Factory Default
Enable
Disable
If this feature is enabled, you can answer incoming calls by simply
saying a word loudly enough. For example, when you hear a series
of beeps for an incoming call, you can answer the phone by saying
"Hello" or any other word loudly. This is enabled from the factory but
you can disable this. If this mode is disabled, you have to tap the Jog
Dial or the Phone Button to answer an incoming call.

10.3 Enabling/Disabling Voice Prompts

Voice Prompt
Factory Default
Enable
Disable
following voice prompts are always on.
- Voice prompts for battery level indicator
SMH5
"VOX phone"
Enable
Tap the Phone Button
Tap the Jog Dial
"Voice prompt"
Enable
Tap the Phone Button
Tap the Jog Dial
19