Front Cover - IBM 7012 G Series Service Manual

Front Cover

Attention: Do no operate the system unit with the covers removed. Operating with the
covers on ensures adequate cooling of the components.
Removal
1. Set the power switches of the attached devices to Off.
2. Set the power switch of the system unit to Off.
3. Disconnect the power cable from the wall outlet.
4. Set the mode switch to the service position (
5. Remove the key from the mode switch, if present, to unlock the front cover.
6. Firmly grip the front cover and pull forward from the bottom first, then the middle, and
then lift the cover to remove it from the unit.
).
Removal and Replacement Procedures
4-3