Working With Faxes Stored In Memory; Printing And Deleting Documents In Memory - Canon MultiPASS F50 User Manual

F50 Chapter 4.qxd 06/01/2001
Load document in ADF
2
Insert the document face up in the ADF tray.
select group
3
Press the One-Touch Speed Dialing button for the group dial list, or
press
on the numeric keypad.
The group name will display in the LCD. The document is scanned, and faxing
begins automatically.

Working with Faxes Stored in Memory

Printing and Deleting Documents in Memory

The F50 can store up to 50 documents or 270 pages in memory.
A stored document can be printed for review or deleted from memory.
A document is stored in memory when:
• The document is scanned for memory sending or delayed sending, and has
not yet been sent.
• The document is scanned for sequential sending. (See "Tips on Sending
Faxes or Emails Using MultiPASS" on page 11.)
• If the MultiPASS Suite has been set to automatically upload faxes to the PC
and a fax comes in when the PC is off, the fax will stay in the F50's memory
until PC is turned on again. The fax will then automatically upload to the PC
and be deleted from memory.
• A fax received when the F50 is being used for other tasks, or cannot print
due to error (such as paper not loaded). When the F50 becomes able to
print, any faxes received during this period will automatically be printed
then deleted from memory.
4:08 PM Page 31
Coded Dial
on the control panel, and enter the code for the group dial list
When memory is full, the operations described above cannot be
performed. Regularly deleting documents from memory keeps the
memory free for these operations.
31