Canon MultiPASS F50 User Manual page 68

F50 Chapter 9.qxd 06/01/2001
F50 User's Manual
Message
MEMORY
USED—nn%
NO RX
PAPER
(#012)
NO TEL # (#22) No phone
NOT
AVAILABLE
(#025)
PUT IN
CARTRIDGE
REC'D IN
MEMORY
RECEIVED
IN FILE
TRY AGAIN
IN B&W
(#085)
TX/RX
CANCELED
TX/RX NO.
nnnn
62
4:09 PM Page 62
Possible Cause
Shows percentage If you need more memory, wait for the machine to send any faxes. Also,
of memory used print or delete any documents in memory that you no longer need. See
"Printing and Deleting Documents in Memory" on page XX.
Recipient's fax Contact the receiving party and have them load paper in their fax
out of paper or machine or free up space in their fax memory.
memory is full
Use regular dialing, or use a one-touch speed dial button or coded
number speed dial code. See "One-Touch Speed Dialing" on page XX, or
"Coded Speed Dialing" on page XX.
A group speed- Use regular dialing, or enter a one-touch speed dialing button or coded
dialing number speed dialing code that only has one number assigned to it.
was manually
entered
Printhead not Install the printhead.
installed
Fax received and A received fax is stored in memory when the F50 is busy with other
stored in memory tasks , or the F50 could not print due to an error such as no paper or
ink. If the F50 was busy, the fax will print as soon as it is finished with
other tasks. If necessary, clear the paper jam, load paper in the multi-
purpose tray or replace the empty ink tank.
Fax received in Upload the document to your computer, or print the document. See
memory "Printing and Deleting Documents in Memory" on page XX.
MultiPASS Status Start the MultiPASS Status Monitor. On the Windows desktop, click
Start, then Programs. In the Programs menu, click on MultiPASS Suite,
Monitor is not
running then MultiPASS Status Monitor.
Color fax was sent Try sending again in B&W. If you send a color document to a fax
to B&W machine machine that does not support color faxing, the document will not be
sent and the LCD will display TRY AGAIN IN B&W. Send the fax again
in black & white.
Alternatively, you can enable the COLOR DIRECT TX setting that allows
you to send color documents to any fax machine.
To enable COLOR DIRECT TX:
1. Press Menu, then <+ -> until FAX SETTINGS appears. Press Set.
2. Press <+ -> until TX SETTINGS appears. Press Set.
3. Press <+ -> until COLOR DIRECT TX appears. press Set.
4. Press <+ -> to set COLOR DIRECT TX to ON. Press Set.
STOP/RESET was Try sending again.
pressed
ID number is being When the F50 sends or receives a fax, it assigns a unique identification
assigned to the fax number (nnnn) to the fax.
Try This