Configuring Your Fax; Entering Sender Information - Canon MultiPASS F50 User Manual

F50 Chapter 3.qxd 06/01/2001
F50 User's Manual
F50 and answering machine
Wall jack
F50, answering machine and phone
Wall jack

Configuring Your Fax

There are specific steps you should take to
configure your fax for optimum performance:
• Enter your sender information
• Ensure that your F50 is set for the correct
dialing based on your phone service (tone
or pulse)
• Select the mode you wish to use for
receiving faxes
• Set up a distinctive ring pattern if this
feature is available from your phone
company and in use.

Entering Sender Information

FCC rules state that sender information must
be transmitted with every fax sent. This
information includes the fax number,
personal or company name and the date and
time sent.
To enter sender information:
12
4:08 PM Page 12
Answering
Machine
Answering Phone
Machine
F50 and phone
Wall jack
F50 and PC modem
Wall jack
FAX MODE MENUS
FAX/TEL AUTO SW
FAX ONLY MODE
1. RECEIVE MODE
DRPD
MANUAL MODE
ANS. MACHINE MODE
1. DOC. MEMORY LIST
2. MEMORY REFERENCE
2. PRINT DOCUMENT
3. DELETE DOCUMENT
4. FILE PRINT
1. ACTIVITY REPORT
3. REPORTS/LISTS
2. SPEED DIAL LIST
3. USER DATA LIST
4. DOC. MEMORY LIST
1. 1-TOUCH SPD DIAL
4. TEL REGISTRATION
2. CODED SPEED DIAL
3. GROUP DIAL
1. USER SETTINGS
5. FAX SETTINGS
2. REPORT SETTINGS
3. TX SETTINGS
4. RX SETTINGS
6. PRINTER SETTINGS
7. SYSTEM SETTINGS
Phone
PC