Caution And Warnings; Residential Installation - New Buck Corporation 80ZC Operation Maintenance Safety

Zero clearance cabinet for use with fireplace model 80 only
Hide thumbs Also See for 80ZC:
Table of Contents

Advertisement

Listed NEW BUCK CORPORATION:
Model 80ZC Zero Clearance Cabinet Assembly For Use With Model 80 Only.
CAUTION:
Read through all of these instructions carefully. Follow approved Chimney Manufac-
turer's Installation exactly. Failure to install the Cabinet Fireplace, Stove and Chimney as described in
the instructions will void the manufacturer's warranty and may have an effect on your Homeowner's
Insurance. A major cause of chimney related fires is failure to maintain required clearances (air spaces)
to combustible materials. It is of the utmost importance that these parts be installed only in accordance
with these instructions.
"DO NOT USE CHEMICALS OR FLUIDS TO START THE FIRE."
"DO NOT BURN GARBAGE OR FLAMMABLE FLUIDS."
"DO NOT BUILD A FIRE DIRECTLY INSIDE THE ZC CABINET. IT IS DESIGNED
SOLELY FOR HOUSING THE MODEL 80 STOVE."
"WARNING -THIS FIREPLACE HAS NOT BEEN TESTED WITH AN UNVENTED
GAS LOG SET. TO REDUCE THE RISK OF FIRE OR INJURY, DO NOT INSTALL
AN UNVENTED GAS LOG SET INTO THIS FIREPLACE."
CAUTION:
"Never use gasoline, gasoline - type lantern fuel , kerosene, charcoal lighter
fluid or similar liquids to start or 'freshen up' a fire in this fireplace. Keep all such liquids well
away from the fireplace while it is in use,"
"Disposal of Ashes:
Ashes should be placed in a metal container with a tight-fitting lid. The closed container of
ashes should be placed on a noncombustible floor or on the ground, well away from all combus-
tible materials, pending final disposal. If the ashes are disposed of by burial in soil or otherwise
locally dispersed, they should be retained in the closed container until all cinders have thor-
oughly cooled."
"Do Not Use Grate or Elevate Fire-Build Wood Fire Directly on Hearth in Stove."
For operation and use of air and damper controls, see stoves Owners Manual for use of air and
damper control.
For operation and use of electrical assemblies, see stoves Owners Manual for use of electrical
assemblies
"USE SOLID WOOD FUEL ONLY".
The Zero-Clearance Cabinet and the Model 80 Installed (hereafter referred to as the 80ZC) is designed
for installation in a family dwelling, where minimum clearance is desired.

RESIDENTIAL INSTALLATION

Page 4

Advertisement

Table of Contents
loading

Table of Contents