Table of Contents
Advertisement
CONTINUED FRAMING AND INSTALLATION
13. Finish the wall around the 80ZC using brick, rock, sheetrock, paneling or any type of finishing
material.
CAUTION:
Do not block any openings designed into the unit.
14. Install a mantel above the unit if desired. NOTE that a combustible mantel must be positioned at
least 14" above the top of the Top Front Outside Trim Panel. (See Figure 23)
.
The 80ZC and Model 80 fireplace are now ready for use. Refer to the stove owners manual for
operation, safety and chimney maintenance. Refer to the back of this manual for 80ZC warranty
registration information
FIGURE 23
"A MINIMUM OF 14" FROM
TOP OF UNIT TO TRIM OF
MANTEL OR SUPPORTS"
SIDE VIEW
80ZC CABINET
FINISHED WALL
MANTEL
14" MIN.
TOP FRONT OUTSIDE TRIM PANEL
Page 23
Advertisement
Table of Contents
