Changing The Label; Deleting Sensor Key Programming - Siemens HiPath 500 Operating Instructions Manual

Programming sensor keys
Step by Step
Prog. feature key
Change key
+=Next layer
Key label
Change
Change
Default label
Save
Previous
Exit
Delete
86

Changing the label

The label set when a repdial key was programmed can
also be subsequently changed.
Changing the label
v
Open the Program/Service menu
Select and confirm the option shown.
S
Press the required sensor key.
The seizure is displayed on the screen.
Confirm.
if nec.
Select and confirm to make the change on the second
level.
Select and confirm the option shown.
Confirm.
j
Enter the required key label text
Confirm.
or
Select and confirm to reset to the default label.
Select and confirm the option shown.
or
Select and confirm to cancel the entry.
Confirm.

Deleting sensor key programming

S
Hold down the required key.
Select and confirm the option shown.
page 37.
page 20.