Forwarding Calls On Trunks - Siemens HiPath 500 Operating Instructions Manual

Making calls in the team/executive/secretary configuration
Step by Step
Forward Line: On
1=all calls
2=external calls only
3=internal calls only
1 2
or
128

Forwarding calls on trunks

You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system).
Activating call forwarding for one trunk activates the
function for all trunk keys assigned to this trunk in your
group.
v
Open the Program/Service menu
Select and confirm the option shown.
S
Press the required trunk key.
or
j
Enter the required trunk number.
or
S
If available. Press the "CFW MULAP" key.
(You have programmed a key with the incomplete "CFW
MULAP" function, excluding the call forwarding type
and destination
Confirm,
or
select and confirm the option shown,
or
select and confirm the option shown.
or
3
or Enter the code.
j
Enter the destination phone number.
Confirm.
or
S
If available. Press the "CFW MULAP" key. (You have pro-
grammed the "CFW MULAP" key with the call forward-
ing type and destination,
page 37.
page 79.)
page 79.)