Line Seizure; Trunk Keys - Siemens HiPath 500 Operating Instructions Manual

Hide thumbs Also See for HiPath 500:
Table of Contents

Advertisement

Step by Step
Making calls in the team/executive/secretary configuration

Line seizure

Line seizure must be configured (consult your service
personnel). If automatic line seizure is configured, a
trunk is automatically assigned when you lift the hand-
set or press the trunk key.

Trunk keys

The programmable sensor keys on multi-line phones
function as trunk keys. Every sensor key programmed
as a "Trunk key" (key label: Transfer Trk) corresponds to
a trunk with the result that you can configure up to
eight trunks in OpenStage 60/80 T.
As a team member, you can independently program the
following functions on sensor keys
Direct station select
Join/leave group
(not available on executive phone in an executive/
secretary team)
Ring Transfer: On/Off
(only in an executive/secretary team)
You can also program a sensor key with the function
"Forward Line" (call forwarding) for each line.
LED displays on trunk keys
LED
Explanation
S
Off
T
[1]
Flashing
R
On
[1] In this manual, flashing sensor keys are identified by this icon, re-
gardless of the flashing interval. The flashing interval represents
different statuses, which are described in detail in the correspond-
ing sections of the manual.
page 79:
– The line is in idle mode.
– Incoming call on the line
– Hold reminder is activated
– The line is on "Hold".
– The line is busy.
123

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents