Step by Step
Ringer cutoff on
Ringer cutoff off
Turning ringer cutoff on and off
If you do not wish to take calls, you can activate the ring-
er cutoff function. Calls are only identified by one ring
signal, an indication on the display, and a key which has
been programmed to flash (such as a trunk key).
Activating
c
Open the idle menu
Select and confirm the option shown
Deactivating
c
Open the idle menu
Confirm.
Deactivating the ring tone
You can deactivate your ring tone if you do not want to
be disturbed by your phone ringing.
Deactivating
*
Press the key shown until the icon for the deactivated
ringer appears on the display
Activating
*
Press the key shown until the icon for the deactivated
ringer disappears on the display.
[1] "Different displays in a HiPath 4000 environment (not for HiPath 500)"
page 165
Privacy/security
page 25.
[1]
.
page 25.
page 22.
99