Configuring Using The Program/Service Menu - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Prog. feature key
Change key
+=Next layer
Destinations g
Repdial key
Speed dial
Key label
Exit
Another key

Configuring using the Program/Service menu

v
Open the Program/Service menu
Select and confirm the option shown.
S
Press the required sensor key.
If the key is already in use, the programmed phone
number appears on the screen.
Confirm.
if nec.
Select and confirm to save the phone number on the
second level.
Confirm.
Confirm.
j
Enter the station number.
or
Select and confirm the option shown.
j
Enter the speed-dial number (the speed-dial numbers
correspond to the system phonebook
if nec.
Select and confirm the option shown
Confirm.
or
Select and confirm the option shown.
Programming sensor keys
page 37.
page 33).
page 86.
85