Placing An External Call On Hold - Siemens HiPath 500 Operating Instructions Manual

Enhanced phone functions
Step by Step
Held on line: 801
Retrieve line
70

Placing an external call on hold

If you have programmed a hold key on your phone
page 79, you can put external calls on hold.
Then all other stations can accept the call on the as-
signed trunk.
S
Press the "Hold" key.
The message of the relevant trunk appears (e.g. 801)
and note the trunk number.
If available, the LED of the assigned trunk key flashes
slowly.
if nec.
\ s
or
Replace the handset or press the key shown.
Depending on the configuration, this may be necessary
so other members can also pick up the call on hold.
Picking up a held call
Prerequisite: One or more calls are on hold. The phone
is idle.
v
Open the Program/Service menu
Select and confirm the option shown.
or
S
If the "Retrieve"
j
Enter the noted trunk number.
or
T
If there is a "Line:" key available for the relevant trunk,
this flashes slowly. Press the key shown.
page 37.
page 79 key is available, press it.