The Various Components Of The Blood-Pressure Monitor; Putting The Blood-Pressure Monitor Into Operation; Inserting The Batteries - Microlife BP 3BE0-4 Instruction Manual

3. The various components of the blood-pressure monitor

The illustration shows the blood-pressure monitor, consisting of:
LCD Display
Battery Cover
Wrist Cuff
Wrist cuff Type WC1 13.5–19.5 cm, for wrist circumference of 13.5 to 19.5 cm

4. Putting the blood-pressure monitor into operation

4.1. Inserting the batteries

After you have unpacked your device, first insert the batteries. The battery compartment is
located on the left lateral side of the device (see illustration).
a) Remove cover as illustrated
b) Insert the batteries (2 x size AAA 1.5V), thereby observing the indicated polarity.
c) If the battery warning appears in the display, the batteries are empty and must be replaced
by new ones.
Attention!
• After the battery warning appears, the device is blocked until the batteries have been replaced.
• Please use «AAA» Long-Life or Alkaline 1.5V Batteries. The use of 1.2V Accumulators is not
recommended.
Time button
M-button (Memory)
START button
O/I button
5